Download | Shipshave Support

💻 Slick PC App System Requirements

Minimum Requirements
OS: Windows 10 (20H1+) or Windows 11
CPU: Intel Core i3 8th‑gen / AMD Ryzen 3 2000‑series
RAM: 8 GB
Storage: 256 GB

Recommended Requirements
OS: Windows 11
CPU: Intel Core i5 10th‑gen / AMD Ryzen 5 3000‑series
GPU: Intel (Quicksync enabled), NVIDIA (NVENC enabled), AMD (AMF Enabled)
RAM: 16 GB+
Storage: 512 GB+

📦 Slick PC App Installation Instructions

Standard Installation (Recommended)

Download the latest .msix file from the Slick PC App section above
Double-click the downloaded .msix file — this opens the App Installer
Click Install and wait for the installation to complete
Slick will launch automatically when finished

Install via PowerShell

If the App Installer is unavailable, disabled by your organisation, or fails to open, you can install the .msix package using PowerShell as a normal user:

Open PowerShell (no admin rights needed — just search for "PowerShell" in the Start menu)
Run the following command, replacing C:\Users\YourName\Downloads\SLICK_VER.msix with the actual path to your downloaded file:
```
Add-AppxPackage -Path "C:\Users\YourName\Downloads\SLICK_VER.msix"
```
Tip — getting the file path: In File Explorer, browse to your downloaded .msix file, then either:
- Hold Shift and right-click the file, then select "Copy as path", or
- Select the file and press Ctrl+Shift+C
Then paste the copied path into the command above, replacing the example path (keep the quote marks).
Once complete, Slick will appear in your Start menu

Tip: If you get a policy error, ask your IT administrator to enable sideloading on your device.

🔄 Updating Existing Slick Installation

To update Slick, follow the same steps as the installation instructions above, using your newly downloaded .msix file.

Important — same Slick version, different firmware: Occasionally, a new Slick release may share the same version number as your currently installed copy but is bundled with a different firmware version. Because the package contents have changed while the version number has not, Windows will block the installation with an error like "the provided package has the same identity as an already-installed package but the contents are different".

To resolve this, Do not uninstall Slick — doing so will remove your content.

Instead, download and install the updated firmware package separately (see the firmware column in the table above). Follow the ITCH firmware update instructions found here, and then select "Browse" and select the downloaded firmware update package.